dormakaba USA Inc. | Multiplexer Installation Guide 7038.0320
Introduction
The Multiplexer is used in multi-lock systems and allows multiple safe locks to connect with the Keypad.
Connect the Multiplexer
Follow these steps to connect a Multiplexer to a LA GARD safe lock system:
1.
Mount the Multiplexer to the safe wall via the holes and screws provided; refer to the diagram below.
2.
Connect each safe lock into the numbered input ports on the Multiplexer (up to 5).
Note:
Input safe locks in numerical order, with the #1 input port on the Multiplexer always populated
first.
3.
Connect the Keypad cable to the Multiplexer side port.
Specifications
Cables
1 x 26 AWG 6” cable (43109-3)
1 x 26 AWG 18” cable (41040-1) *
at an additional cost
Environmental
Operating & Storage Temperature Range: For UL compliance, this product was verified for operation at 32 –
122
°F (
0 – 50
°
C)
Relative Humidity Range: 0 – 95% non-condensing
Note:
The Multiplexer is not UL evaluated.
