Installation
Technical Manual
20
HAC Standard fixing - 02/2018
dormakaba c-lever pro
•
A = 18.3 mm: Measure cylinder standoff B on the c-lever being replaced and compare it
with the minimum dimension in the table.
A
A
B
B
c-lever pro
Without replacement plate
With replacement plate
Minimum
cylinder standoff B:
2.7 mm*
4.2 mm*
•
If the measured cylinder standoff B is less than the *minimum dimension of the inside or
outside, the locking cylinder must be replaced.
4.3
Spindle standoff
•
The door thickness, backplates and lever handle type must be taken into account when
determining the length of the spindle.
Lever handle type
“A” spindle standoff mm
HA
46 – 70
A
HB
46 – 63
HC, HO, HQ
46 – 50
HD
46 – 71
HL
46 – 92
HM
46 – 68
HN
46 – 85
HP
46 – 72
KD
46 – 46
KD angled
46 – 56
4.4
Drilling fixing holes
(Only for standard fixing)
