Dormakaba BEST Wi-Q 45HQ Скачать руководство пользователя страница 10

Страница: 10 / 12

Installation Instructions for Wi-Q™ Technology 45HQ Mortise Locks

BEST

a Product Group of dormakaba USA Inc.

Completing the installation

Install top cover
(inside escutcheon)

1 Connect the antenna to its mating connector.
2 Place the top cover against the door and above the

fire plate. Slide the top cover down toward the bot-
tom cover as shown in Figure 17.

Caution:

As you slide the top cover onto the fire

plate, feed the antenna wire down into the bot-
tom cover. Be sure not to pinch the antenna
wire on the bottom cover as you slide the top
cover into place.

3 Use two cover screws to secure the cover to the side

of the fire plate, as shown in Figure 17.

Note:

Phillips Type 2 and T20 Torx options are avail-

able for the cover mounting screws.

Install mortise case faceplate

1 Secure the mortise case faceplate to the mortise

case with the faceplate mounting screws.

2 Check the lock for proper operation.

Figure 16 Inside view of top cover

Top cover

Antenna wire

Figure 17 Installing the top cover

Inside of door

Wireless
cover

Cover screws

Antenna
wire

Outside of door

Figure 18 Installing the mortise case faceplate

Mortise
case
faceplate

Faceplate
mounting
screws

Содержание BEST Wi-Q 45HQ













Результаты поиска

Содержание BEST Wi-Q 45HQ

Отзывы:

Похожие инструкции для BEST Wi-Q 45HQ

Бренды по названию

Популярные бренды

Dormakaba BEST Wi-Q 45HQ, Руководство по установке

Результаты поиска

Содержание BEST Wi-Q 45HQ

Отзывы:

Похожие инструкции для BEST Wi-Q 45HQ

Бренды по названию

Популярные бренды