
12
3.7
USB connection
Storage setting of MID
Before transmitting document, you must set storage mode for your MID firstly:
1.
Connect MID with computer by using USB transmission line. Notice bar will show the
notice prompt.
2.
Click status bar, options of status bar show.
3.
Among opt ions of status, click to c hoose
USB connected
, th en click to
open USB
storage device.
4.
At this time, USB has already been connected.
Figure 3-7
Copy the document to storage card
1.
Connect MID and computer together with USB cable.
2.
After
setting
according to
storage of MID
, connect with computer successfully.
3.
Open your computer, in
my computer
, examine content in “removable disk (x)”.
4.
Find the document you want to copy, copy it to “removable disk(x)”.
5.
After c ompletion of c opying, c lick “safely r emove hardware” in t askbar of y our
computer to unload.
Content of MID storage device
1.
NAND FLASH storage device, space for MID to store document itself.
2.
TF removable memory card.
3.
The two above-mentioned storage devices both can be visited through connection with
your computer with USB.
Attention: when your MID is connected with USB cable, if you start up USB storage
device, you will cannot visit the memory card through MID, if you want to
visit memory card in MID, only disconnect USB cable.
Содержание BNR-7063
Страница 1: ...BNR 7063 User Operating Manual ...