Harness System Adjustments for
Smaller Infants
10
continued on next page
9
1.
With Buckle in the 1st Slot,
Fully Recline the Seat
If you need to move the buckle to the 1st
slot, see pages 7-8.
5.
Replace Pad and Check
Buckle
Pull up on buckle to make sure it is
secured. The buckle
MUST
not pull out.
2.
Lift Pad Off of Front of
Child Restraint
4.
From Top of Seat, Lay the
Metal Retainer Flat Against
the Shell As Shown
3.
From Bottom of Seat, Pull
Metal Retainer Down and
Push It Up into Middle Slot
As Shown
Adjusting Headrest/Harness Height
WARNINGS:
Make sure that the harness height is
correct for your child’s size.
Failure to follow these steps can result in serious
injury or death.
1.
Fully Loosen Harness
Straps
Push down on harness release
lever (under fl ap on front of seat
pad) while pulling out on harness
straps as shown.
2.
To Adjust Headrest/
Harness Height
Rotate headrest/harness
adjustment levers inward.
Move the headrest up or down
to the proper height for your
child.
See pages 5-6 for fi t
guidelines.
Release it into slot to lock. Make
sure it is securely locked into
place.
If you cannot achieve a snug harness fi t for your child, make
these adjustments. You MUST use the body pillow and the
headrest MUST be in the lowest position.
