6
7
❷
Insert the gear boxes
• Slide the gear boxes onto the
rear axle and ensure the gear
wires on each side are inserted
into the wheel well hole.
❸
• Firmly press the rear wheels
into the gear box on each side.
• Insert the spacer into the
wheel.
• Press the tabs of the hubcaps
into the slots of the wheel rim.
• Fasten the small washer and
wheel nut onto the end of the
axle.
❹
• Slide the large washer onto
axle notch.
• Insert the spacer into each
side of the wheel and slide
the wheel onto the axle.
• Fasten the small washer and
nut onto the axle.
❺
•
the center of the hubcaps.
❶
A ach the trunk cover.
• Insert the tabs on the back of
the trunk cover into the slots of
the body
.
• Align the holes on the front
tabs of the trunk cover with the
holes on the body interior and
fasten with the two screws
Follow the assembly steps in the order listed below.
Assembly:
Tip
Using the wrenches
simultaneously turning
each wrench in
❶
❷
❷
❸
❺
❺
❺
❺
❹
❹
❸
