background image

14

Limited Three Year Warranty

Doran Scales, Inc. warrants Model DS4100 to be free from defects in material and
workmanship for a period of three (3) years from date of shipment.  Any product found
to be defective within this time period may be returned to Doran’s factory, freight
prepaid, with prior return authorization and proof of purchase showing date of original
sale, for repair or replacement at no charge.

Doran’s liability under this warranty is limited to the repair or replacement of the
defective product and in no event shall Doran Scales, Inc. be liable for consequential or
indirect damages to equipment or personnel. Nor shall Doran Scales, Inc. be liable for
damages to equipment or for personal injury caused by misuse, overload, accidental
damage, alteration, improper installation, or unauthorized opening of the equipment.
Under no circumstances will Doran Scales, Inc. be responsible for any indirect or
consequential damages due to errors in weighing or failure of a Doran Scales, Inc.
product to perform properly.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. THIS WARRANTY CONSTITUTES DORAN’S EXCLUSIVE WARRANTY.
THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Doran Scales, Inc.

1315 Paramount Pkwy

Batavia, IL 60510

1-800-264-4107

www.doranscales.com

Содержание DS4100



















Отзывы: