Dora Metal DM-92601, Руководство пользователя, Страница: 36 / 37

EN - DORA METAL
36 Upright refrigerators and freezers
Basic operation
The power supply is turned on by pressing and holding the button for 5 seconds on the control panel. The switching
condition is signalled by a short acoustic signal and graphically - showing the current value of the air temperature in the chamber on the
display LCD.
In order to display and modify the required temperature of the chamber:
 Press the button to increase the required temperature of the chamber.
 Press the button to decrease the required temperature of the chamber.
 After setting of the temperature press the button or wait for 5 secunds – ten the required temperature is stored and the display
returns to the current temperature in the upright refrigerator of freezer.
The power supply is turned off by pressing and holding the button
for 5 seconds on the control panel.
Mode ECO
The advanced controller used in the device detects automatically the operating conditions of the mode ECO. When the
proper conditions are detected the controller switches the device automatically in the mode ECO. Under such conditions
the function ECO allows saving a part of energy in relation to the operation in the basic mode
Note! Message CL
Clean the condenser. After cleaning follow the below instruction.
In order to turn off the alarm
CL reminding that the condenser must be cleaned (every 4 weeks):
- press the button until the display shows the message CND ,
- hold the buttons and at the same time.
After these steps the parameter CND is zeroed and the cycle is set up to the beginning.
RATING PLATE
Rated voltage
Current frequency
Rated current
Max. lighting power
Heating system power
Factory number/year of
production
Mass
Climatic class
Type of refrigeration unit
Refrigerant
Name and type of product
Place for product
designation Data concerning the producer
Temperature range
Refrigerant mass