Doppler Systems DDF7011, Руководство пользователя

Страница: 12 / 47

6
DDF7011 and DDF7012 Users Manual User's Guide
9) Connect one control cable and one coaxial cable to each antenna.
10) Use the mounting hardware to connect the direction finder antenna to the mast.
11) Use zip ties to secure the cables to the inter connecting antenna hardware and the mast
12) Open the core module case.
13) Connect the radio modem antenna to the TNC connector on the core module.
14) Connect each of the direction finder antenna and control cables
15) Remove the laptop computer from its case
16) Connect the laptop power cable from the connector panel to the laptop computer
17) Connect the Ethernet crossover cable between the laptop and the core module.
18) Connect the GPS receiver to the core module. Position the GPS receiver so it can easily
acquire the GPS satellites.
19) Connect 12 V power to the unit using the supplied cable and power supply.
20) Apply power to the core module.
21) Check to make sure the direction finder and the receiver are powered
22) Turn on the laptop and start the TargetTrack software.
ANTENNA MOUNTING
For optimum results it is necessary to mount the fixed site antenna as high as possible above
the average terrain. It is also required that the antenna be mounted at the top of any metallic
structure (tower or mast) so that there is no metal in the antenna pattern. Do not mount the
antenna near any transmitting antenna. Serious damage can occur if large rf fields are
applied to the antenna. If you are using a radio modem, maintain maximum separation of
the radio modem antenna from the direction finding antenna. Horizontal and vertical
separation is best if possible. See
http://www.dopsys.com/appnotes/Interference.html
http://www.dopsys.com/appnotes/Interference.html for more information.