Doosan Infracore HP210WDO-T4F, Руководство по эксплуатации и обслуживанию

Страница: 22 / 122

Operation & Maintenance Manual Safety
Coolant System
Hot engine coolant and steam can cause injury. Ensure the reservoir cap is removed with
due care and attention.
Do not remove reservoir cap while radiator is hot. Allow radiator to cool before removing
reservoir cap.
Hot engine coolant and steam can cause injury. When adding coolant
or antifreeze solution to the engine radiator, stop the engine and
allow radiator to cool prior to releasing the reservoir cap. Using a
cloth to protect the hand, slowly release the reservoir cap, absorbing
any released fluid with the cloth. Do not remove the reservoir cap
until all excess fluid is released and the engine cooling system fully
depressurized.
Follow the instructions provided by the antifreeze supplier when adding
or draining the antifreeze solution. It is advisable to wear personal
protective equipment to prevent skin and eye contact with the antifreeze
solution.
Transport
When loading or transporting the compressor, ensure the specified lifting and tie down points
are used.
When loading or transporting the compressor, ensure the towing vehicle, its size, weight,
towing hitch, and electrical supply are all suitable to provide safe and stable towing at speeds
either, up to the legal maximum for the country in which it is being towed, or as specified
for the compressor model if lower than the legal maximum. Do not exceed gross vehicle
weight rating.
Before towing the compressor, ensure:
• The tires and towing hitch are in a serviceable condition and tires are properly inflated.
• The canopy is secure.
• All ancillary equipment is stored in a safe and secure manner.
• The brakes and lights are functioning correctly and meet necessary road traffic requirements.
• Breakaway cables/safety chains are connected to the towing vehicle.
22