Doosan HP450/VHP400WCU-T4i, Руководство по эксплуатации и обслуживанию, Страница: 42 / 108

Operating & Maintenance Manual Operating Instructions
42
FAULT AND ALERT
If a FAULT occurs, the display unit will display the SPN, FMI, OC, and description for Engine
Fault or the CPR Code and Description for Compressor Error. An engine fault will be displayed
only when the engine is shutdown. The Fault has to be acknowledged by the user by pressing
the ENTER Button. The unit does not time out in the fault display. After 60 seconds, if the Fault
is still active, the fault display will appear again on the screen and will remain until
acknowledged by the user. This will continue to occur as long as the Fault is active.
See Figure 1.
Figure 1
When present, an ALERT with the number of alert conditions will popup on the screen, the
user will press the UP or DOWN Button to display the alert, or press the ENTER Button to
acknowledge an alert has occurred. If there are multiple alerts, pressing the DOWN Button will
scroll through the various alerts. All Faults and Alerts will be displayed until the engine shuts
down and then the most severe Fault will be displayed as a Fault. Pressing the ENTER Button
after the Alert has been displayed, acknowledges the message and the display unit returns to
the Default Screen of Engine Hours.
See Figure 2.
Figure 2