Doosan DX380LC-7K, Руководство по эксплуатации и обслуживанию, Страница: 315 / 424

Inspection, Maintenance and Adjustment
4-25
DX380LC-7
10 Hour / Daily Service
Boom, Arm and Front Attachment Pins -
Lubricate
Grease every 10 hours for first 100 hours and every 50 or 250
hours thereafter (See page 4-39) (See page 4-43).
NOTE: If the unit has been running or working in water, the
front attachment must be greased on a 10 hour/daily
basis.
Engine Oil Level - Check
NOTE: When checking level, use a dipstick and always
remove and wipe it clean before making final level
check.
1. Stop engine and wait for fifteen minutes. This will allow all
oil to drain back to oil pan.
2. Remove dipstick (1, Figure 5) and wipe the oil off with a
clean cloth.
3. Insert dipstick fully in oil gauge tube, then take it out again.
4. Engine oil level must be between "HIGH" and "LOW"
marks on dipstick.
NOTE: If oil is above "HIGH" mark on dipstick, oil must
be drained to return oil to proper level.
5. Add oil through engine oil fill cap (2, Figure 5), if the oil
level is below the "LOW" mark.
DS1901889
1
2
Figure 5
WARNING
AVOID DEATH OR SERIOUS INJURY
Allow engine to cool before checking oil level to avoid burn
injury.
L
H
FG000616
Figure 6