SAFETY
5
EN
WARNING LABEL IDENTIFICATION
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
SPECIFIC WARNINGS
•
When wearing gloves and operating models with inside trigger,
always be sure that the gloves will not prevent the trigger from
being released.
•
Wear safety shoes, hard hat, safety goggles, gloves, dust
mask and any other appropriate protective clothing while
operating the tool.
•
Do not indulge in horseplay. Distraction can cause accidents.
•
Keep hands and fingers away from the throttle lever until it is
time to operate the tool.
•
Never rest the tool or chisel on your foot.
•
Never point the tool at anyone.
•
Compressed air is dangerous. Never point an air hose at
yourself or co-workers.
•
Never blow clothes free of dust with compressed air.
•
Be sure all hose connections are tight. A loose hose not only
leaks but can come completely off the tool and while whipping
under pressure, can injure the operator and others in the area.
Attach safety cables to all hoses to prevent injury in case a
hose is accidentally broken.
•
Never disconnect a pressurised air hose. Always turn off the
air supply and bleed the tool before disconnecting a hose.
•
The operator must keep limbs and body clear of the chisel. If a
chisel breaks, the tool with the broken chisel projecting from
the tool will suddenly surge forward.
•
Do not ride the tool with one leg over the handle. Injury can
result if the chisel breaks while riding the tool.
•
Know what is underneath the material being worked. Be alert
for hidden water, gas, sewer, telephone or electric lines.
•
Use only proper cleaning solvents to clean parts. Use only
cleaning solvents which meet current safety and health
standards. Use cleaning solvents in a well ventilated area.
•
Do not flush the tool or clean any parts with diesel fuel. Diesel
fuel residue will ignite in the tool when the tool is operated.,
causing damage to internal parts. When using models with
outside triggers or throttle levers, take care when setting the
tool down to prevent accidental operation.
•
Do not operate the tool with broken or damaged parts.
•
Never start the tool when it is lying on the ground.
•
This tool is not designed for working in explosive atmospheres.
•
This tool is not insulated against electric shock.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
WARNING
WARNING
Always wear hearing
protection when operating
this tool.
WARNING
WARNING
WARNING
WARNING
WARNING
Always turn off the air supply
and disconnect the air supply
hose before installing,
removing or adjusting any
accessory on this tool, or
before performing any
maintenance on this tool.
OFF
ON
Air powered tools can vibrate
in use. Vibration, repetative
motions or uncomfortable
positions may be harmful to
your hands and arms. Stop
using any tool if discomfort,
tingling feeling or pain occurs.
Seek medical advice before
resuming use.
WARNING
Keep body stance balanced
and firm. Do not overreach
when operating this tool.
WARNING
WARNING
WARNING
Do not carry the tool by the
hose.
WARNING
WARNING
Do not use damaged, frayed
or deteriorated air hoses and
fittings.
WARNING
WARNING
Operate at 90 psig
(6.2 bar / 620 kPa)
Maximum air pressure.
90 psig
(6.2 bar / 620 kPa)