Doosan BALLOON LIGHT LED 6x100W, Руководство по эксплуатации и техническому обслуживанию, Страница: 7 / 36

7 BL600 LED Operation & Maintenance Manual
ENVELOPE INSTALLATION INSTRUCTIONS
Unpack your new envelope.
• Unfold the envelope on a smooth, clean surface.
• Open the zipper.
When REPLACING an old envelope, FIRST remove
original envelope.
• Unplug the balloon unit and open the envelope zipper.
Figure 1
• Unscrew the nut on the top of the envelope. (Fig. 1)
Set the nut safely aside.
• Pass the cage through the envelope zipper opening.
Figure 2
• Unscrew the 12 screws which secure the strap. (Fig.
2)
Figure 3
• Set the strap with its screws mounted aside. (Fig. 3)
Figure 4
• Unplug the ground wire from the cage. (Fig. 4 black
arrow)
• Unscrew the six nuts on the South Pole Plate inside
the envelope. (Fig. 4 white arrows)
• Carefully remove the cage from the assembly.
• Detach the old envelope from the assembly by sliding
up along the equipment.
• Put the envelope back in place.
Figure 5
• Take care of the gasket: DO NOT lose it. (Fig. 5)
• Position the zip in front of the ground wire.
• Slide the cage inside the envelope through the zipper
opening.
Figure 6
• Reattach the ground wire to the ground pin on the
cage. (Fig. 6 black arrow)
• Screw the six South Pole Plate nuts onto the cage.
(Fig. 6 white arrows)