Doosan BALLOON LIGHT LED 6x100W, Руководство по эксплуатации и техническому обслуживанию, Страница: 12 / 36

BL600 LED Operation & Maintenance Manual 12
Figure 7
• Replace the LED light engine 10-85-058 (6000°K)
with a new one. (Fig. 7)
Figure 8
• Replace the transparent cover and screw the six
screws on the transparent cover. (Fig. 8)
• Slide the cage inside the envelope through the zipper
opening.
Figure 9
• Reattach the ground wire to the ground pin on the
cage. (Fig. 9 black arrow)
• Screw the six South Pole Plate nuts onto the cage.
(Fig. 9 white arrows)
• Engage the « 3rd screw » and « 4th screw » of the
strap inside the holes of the heatsink located on the
right of the inside harness cable.
• Tighten these two screws for two turns only.
In order not to damage the screw, use a 4mm
Allen key.
• Move the strap to the right and outside the vertical
grid wire.