Doosan 12/154 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 108

background image

102

PARTS ORDERING

12/154

Repairs and replacements shall be made by the Company F.O.B. point
of shipment. The Company shall not be responsible for costs of
transportation, removal or installation.

Warranties  applicable  to  material  and  equipment  supplied  by  the
Company  but  wholly  manufactured  by  others  shall  be  limited  to  the
warranties extended to the Company  by the manufacturer which are
able to be conveyed to the Purchaser.

Delivery:

Shipping dates are approximate. The Company will use best

efforts to ship by the dates specified; however, the Company shall not
be liable for any delay or failure in the estimated delivery or shipment
of material and equipment or for any damages suffered by reason
thereof.

The company makes no other warranty or representation of any kind
whatsoever, expressed or implied, except that of title, and all implied
warranties, including any warranty of merchantability and fitness for a
particular purpose, are hereby disclaimed.

Limitation of Liability:

The remedies of the Purchaser set forth herein are exclusive, and the
total liability of the Company with respect to this order whether based
on contract, warranty, negligence, indemnity, strict liability or
otherwise, shall not exceed the purchase price of the part upon which
such liability is based.

The  Company  shall  in  no  event  be  liable  to  the  Purchaser,  any
successors  in  interest  or  any  beneficiary  of  this  order  for  any
consequential, incidental, indirect, special or punitive damages arising
out of this order or any breach thereof, or any defect in, or failure of, or
malfunction of the parts hereunder, whether based upon loss of use,
lost  profits  or  revenue,  interest,  lost  goodwill,  work  stoppage,
impairment  of  other  goods,  loss  by  reason  of  shutdown  or  non-
operation, increased expenses of operation or claims of customers of
Purchaser for service interruption whether or not such loss or damage
is based on contract, warranty, negligence, indemnity, strict liability or
otherwise.

AIREND EXCHANGE PROGRAM

Doosan offers an airend exchange program to benefit portable
compressor users.

Your  nearest  sales  office,  autonomous  company  or  authorised
distributor  must  first  contact  the  Parts  Service  Department  at  the
factory  at  which  your  portable  air  compressor  was  manufactured  for
further instructions.

«
...
104
105
106
107
108
»

Содержание 12/154













































































































Отзывы:

Нет отзывов

Похожие инструкции для 12/154

Бренд: Fein Страницы: 248

Бренд: Sagola Страницы: 20

Бренд: IBASE Technology Страницы: 67

Бренд: IBC Страницы: 8

Бренд: IAI Страницы: 5

Бренд: M-system Страницы: 2

Бренд: BPW Страницы: 4

Бренд: IEMCA Страницы: 85

Бренд: MachineryHouse Страницы: 52

Бренд: Mold-Masters Страницы: 83

Бренд: Pfeiffer Vacuum Страницы: 24

Бренд: Berker Страницы: 3

Бренд: ABB Страницы: 16

Бренд: Tormach Страницы: 82

Бренд: Hendrickson Страницы: 60

Бренд: ALFRA Страницы: 32

Бренд: Gecko Страницы: 2

Бренд: Robland Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды