background image

SAFETY INSTRUCTIONS

4

Guide model

Guide length, L

Travel

Opening height

SK-3600 (chain)

3 620 

2 800 

≤ 

2 800 

SK-4200 (chain)

4 220

3 400

≤ 

3 400

SK-4600 (chain)

4 620 

3 800 

≤ 

3 800 

PK-3600 (belt), option

3 620 

2 800 

≤ 

2 800 

PK-4600 (belt), option

4 620 

3 800 

≤ 

3 800 

1.3.  TRACK

2.  SAFETY INSTRUCTIONS

IMPORTANT! 

 You should observe the safety regulations to preserve people’s health. You must keep the present Manual.

 

   You should follow all the recommendations of the given Manual, as incorrect equipment installation could lead to serious 

damages.

   The Sectional-750/1000/1200/Fast-750 operator is designed for automation of residential sectional doors. It should be used 

only for the purpose intended; any other use is forbidden. 

  DoorHan is not liable for personal injuries, if the product was used for purposes other than intended.

  Make sure that the doors are balanced and function smoothly before installing the operator.

   The installation is to be carried out according to the standards EN 12453 and EN 12445. For providing the required safety 

level, these requirements should be observed in non-EU countries.

   You should check if the doors conform to the standards EN 12604 and EN 12605 (see documentation on the doors). For  

non-EU countries these measures are to be observed for ensuring the normal safety level.

  The mechanical door assembly units must conform to the provisions of the standards EN 12604 and EN 12605.

   Before installing the operator, make sure that the mounting location by its climatic conditions corresponds to the operator’s 

specifications.

   You should not install the equipment in rooms with highly flammable substances or other hazardous media, as this can сред, 

result in explosion or fire. 

  You should use tools, indicated in Section “Tools” of the given Manual, during assembly, installation and adjustment 

 

of the operator.

  You should use a stable support when working at height. 

  The operator is allowed to install at more than 2.5 m height.

  You should use hand and face protection when drilling holes.

  You should use metal goods from the operator package or other goods equivalent to them for fastening the product.

  You should power off when performing installation, cleaning or maintenance of the operator.

   

 

When mounting the operator on doors with the infitting pass door, it is necessary to install an additional safety device,  which 
prevents the operator activation, when the door is open.

   

 

Make sure, that there will not be trapping of articles between movable and fixed elements of the operator when the doors  
move.

   You should use additional DoorHan accessories, since the accessories of third party manufacturers can damage the  auto-

matic system.

   DoorHan is not liable for unstable work of the automatic system, if you use safety devices and accessories, produced by other 

manufacturers without securing approval of DoorHan.

   You should not leave electric engines in a released state. This can lead to uncontrolled movement of the door wings and, as 

a result, to their damage.

   You should not use the operator, if it is necessary to repair or to adjust the equipment, since defects during the assembly of 

the operator or incorrectly installed doors can result in injury. 

   DoorHan is not liable, if the product is not correctly installed or is damaged during operation.

   The electric operator is not equipped with the stationary power cord; therefore mains supply is to be fed to the automatic 

system via an automatic switch with a distance between the adjacent contacts minimum 3 mm. It is recommended to use 
double pole circuit breaker 10 A. 

  Make sure, that there are no foreign bodies within the operating range of the electric operator before its start.

  You should not introduce changes, not stated in the given Manual, into the automatic system.

   

 

You should remove the product package and dispose of it. You should not leave the packaging materials within the reach of 
children.

 

Содержание FAST-750



















Отзывы: