Diagnostic-LED
The
Light sensor
also acts
as Diagnostic-LED.
This LED
light is
only
lit up
for
five
minutes
after
the
BirdGuard
has
been
supplied
with
power.
It
lights
up
as
soon
as
the
BirdGuard
is
supplied
with
power.
ǂ
Permanent illuminated: Device is powered
We may add more
diagnostic
information to the software-
and hardware-controlled Diagnostic-LED
(e.g. blinking for certain information) in the future.
Diagnostic-sounds
After
around
two
to
five
minutes,
the
BirdGuard
emits
brief
diagnostic
sounds
after
it
has
been
connected to the power grid
ǂ
1x diagnostic sound: The BirdGuard is connected to the Internet
ǂ
2x diagnostic sounds: The BirdGuard is able to communicate with the router, but cannot
access the Internet.
ǂ
3x diagnostic sounds: The BirdGuard has no connection to the network
Troubleshooting / common problems
ǂ
Diagnostic-LED does not illuminate for 5 minutes after connecting the BirdGuard to the
power supply and there is no Diagnostic-sound-> Please check if the power supply is
appropriate and properly connected
ǂ
BirdGuard is not connected to the Internet: Please check the WiFi signal strength or cable
connection at the assembly location and www.doorbird.com/checkonline for detailed
troubleshooting
You can contact us at any time via www.doorbird.com/support for support.
7
