DoorBird BirdGuard B10x Series, Руководство по установке

Страница: 8 / 24

5
External speaker
The BirdGuard has a contact for connecting an external speaker, e.g.
horn speaker, siren (two wires). We recommend using the combi horn
speaker/siren for BirdGuard (incl. amplifier within the BirdGuard)
available separately by Bird Home Automation.
The following third party external speakers are compatible:

Power rating: 10 W MAX /8 Ω

Frequency range: 350-10,000 Hz

SPL: (1 W/1 m) 100 dB
Warning: Do not connect speakers with other specification or with 110V
technology, this will destroy the BirdGuard.
Two insulated wires.
Step 5: (Optional) Dowels
If the exterior wall of the house is not made of wood, you should drill two holes 5 mm in diameter in
the wall and then place the dowels provided into the boreholes. If the exterior wall of the house is
made of wood, you will usually not require any dowels. There are special dowels for assembling the
BirdGuard on an insulating wall, e.g. Fischer insulating dowels. Please check with your insulating
material manufacturer regarding which dowels they recommend.
Step 6: (Optional) Attaching the mounting stand
Position the mounting stand against the exterior wall of the house and use the screws provided to
position it in the dowels or on the wall.
Step 7: Preparing the wires
Remove about 5 mm of insulation material at the end of the wires that you would like to connect to
the BirdGuard.
Step 8: Connecting the wires
It is possible to connect the BirdGuard conveniently and safely via the colour-coded cable harness on
the reverse of the BirdGuard. Please use appropriate crimp connectors or terminal strips to connect
the supplied cables with your wires. The accompanying crimp connectors are weatherproof and are
equipped with heat-shrink tubing which can be sealed after assembly by, for example, carefully using
a heat gun.
Description Wire
Network / Ethernet RJ 45 Jack
Alarm output (zero potential) Brown
Alarm output (zero potential) White-brown
Alarm input (zero potential) Blue
Alarm input (zero potential) White-blue
External speaker, negative pole (-) Yellow
External speaker, positive pole (+) Pink
Power supply, negative pole (-) Black
Power supply, positive pole (+) Red
Please take care when connecting the wires. Connecting the wires the wrong way may destroy the
BirdGuard.