DoorBird BirdGuard B10x Series, Руководство по установке

Страница: 5 / 24

2
BirdGuard - back
1) Mounting stand thread
To connect the mounting stand
2) 433 MHz RFID Antenna thread
To connect the external 433MHz RFID antenna
3) 2.4 GHz WiFi Antenna thread
To connect the external 2.4GHz WiFi antenna
4) Cable harness
To connect power, network and all external components
Videos
Need help with the installation? Be sure to watch our installation videos which can be found on
http://www.doorbird.com/support
Each individual step of the installation is clearly documented in the videos.
Installation
All the steps below should be carried out carefully by a competent adult, taking into consideration
any applicable safety regulations. Should you have any questions, please contact us or a competent
specialist directly. Please ensure that all wires used for the installation are undamaged along their
entire length and approved for this type of use.
Network speed and network components
Please ensure that the upload speed of your Internet connection is at least 0.5 Mbps. You can also
carry out a speed test at any time via the DoorBird app. The user experience is only as good as your
network speed, network stability and quality of your network components, such as your Internet
router and WiFi access points or WiFi repeaters. Please also make sure that your network
components are no older than two years old, have been manufactured by a well-known
manufacturer, and have the latest firmware installed.
Should these requirements not be fulfilled, it may happen, for example that the performance of
audio and video is poor or push notifications are delayed or do not arrive on your smartphone or
tablet at all.
High-speed Internet (via landline): DSL, cable or optical fibre
Network: 802.11b/g/n 2.4 GHz or Ethernet, with DHCP