321 VZ County Road 4500
·
Ben Wheeler, TX 75754
·
800.437.3667
·
DoorControlsUSA.com
Care and Cleaning for the DC10327 No-Touch Wave Sensor:
The sensor requires special care to ensure reliability and a long operating life.
1. Use a soft, clean cloth for cleaning. Use the mildest type of cleaner available.
2. When cleaning, spray the cleaning solution onto the cleaning cloth instead of the unit.
3. Be sure to wipe off any excess liquid from the sensor. Wet spots may affect the sensor’s performance.
IMPORTANT:
Users and installers of this product are responsible for ensuring that the installation and
configuration of this product complies with all national, state, and local laws and codes related to locking
and egress devices. Door Controls USA will not be held responsible for the use of this product in violation
of any current laws or codes.
IMPORTANT WARNING:
For a weatherproof installation, ensure the unit is installed in a waterproof back
box, and that the faceplate and faceplate screws are properly sealed. Incorrect mounting may lead to
exposure to rain or moisture in the enclosure which could cause a dangerous electric shock, damage the
device, and void the warranty. Users and installers of this product are responsible for ensuring this product
is properly installed and sealed.
6C62MXFS
6-32x
5
/
8
” Phil Pan M/S S/S
DC10325
Wave Plate Single Gang Indoor
DC10329
Jamb Mount Surface Box
Replacement Parts:
WARRANTY:
This Door Controls USA product is warranted against defects in material and workmanship
while used in normal service for one (1) year from the date of sale to the original customer. Door Controls
USA’s obligation is limited to the repair or replacement of any defective part if the unit is returned,
transportation prepaid, to Door Controls USA. This Warranty is void if damage is caused by or attributed
to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal
usage, or faulty installation, or if for any other reason Door Controls USA determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship.
