Donovan Sidewinder Скачать руководство пользователя страница 5

Страница: 5 / 16

DONOVAN

HELP LINE: 1-800-327-8287

P/N 1809453 Rev. A

Actuator Unit Installation

NOTE:

Actuator unit weighs 134 lbs (64kg). Use over-head

lifting device and sling to lift unit. Sling should be wrapped

around rectangular mounting bracket. Do not lift from

hydraulic cylinder.

Actuator unit may be welded in place to steel trailer, use

extreme caution to protect chrome cylinder rod from weld

splatter. Will cause permanent damage to cylinder and void

systems warranty.

NOTE:

If front wall of trailer is thin aluminum or steel.

Reinforce area with backer plate for adequate support.

STEP 1:

Locate actuator unit on front of trailer. Stationary rect

angular tube should be 8.5" from top of trailer and 9.5" in from

drivers side of trailer. Mark mounting holes locations on each of

four mounting plates.

STEP 2:

Remove actuator unit and drill 17/32" holes in marked

locations.

STEP 3:

Reposition actuator unit and mount using 1/2" Grade 5

bolts or better

(bolts not supplied).

STEP 5:

Install windshield using braces, bolts

and

, washer

and nuts

STEP 4:

Connect two provided 37.5" hydraulic hoses to cyl

inder. If using wet kit, refer to page 10 for two longer hoses

provided.

8.5" (21.6 CM)

TOP OF

TRAILER

LIFTING

POINT

WINDSHIELD

1-1/2" BRACE

1" BRACE

9.5" (24.1 CM)

Содержание Sidewinder

















Результаты поиска

Содержание Sidewinder

Отзывы:

Похожие инструкции для Sidewinder

Бренды по названию

Популярные бренды

Donovan Sidewinder, Руководство пользователя

Результаты поиска

Содержание Sidewinder

Отзывы:

Похожие инструкции для Sidewinder

Бренды по названию

Популярные бренды