Connections & Controls
sturdy performance. The aluminum alloy
casing and all metal footswitch ensure
road worthy reliability.
Features
●
Convenient compact size
●
Digital circuit design
●
Two-channel preamp with organic
tube amp sound
●
Sounds based on Peavey 6505*
●
Built-in reverb and cabinet simulator
a
b
c
d
e
Specifications
Power Requirement: 9V DC center
negative
Current Consumption: 200mA
Dimensions: 42x93.5x52mm
Weight: 230g
a
c
d
b
www.donnerdeal.com
f
f
g
e
g
h
i
g
g
h
i
DC 9V Jack:
For power supply, use a 9-volt DC
regulated by AC adapter, 500mA
(plug polarity is positive on the barrel
and negative in the center).
Input Jack:
1/4” mono audio jack, for connecting
instrument.
Output Jack:
1/4” mono audio jack, for connecting
to an amplifier.
LEVEL Knob:
Adjusts the effect output.
REVERB Knob:
Adjusts the reverb level.
GAIN Knob:
Adjusts the effect gain amount.
LOW/MIDDLE/HIGH Knob:
3-band EQ for tone shaping.
CAB SIM Button (with LED):
Press to switch the cab simulator
on/off (the LED will continue flashing
while the cab simulator is on). Press
and hold to switch between the two
channels:
Channel A: based on Peavey 6505*
Rhythm channel (Clean, green LED);
Channel B: based on Peavey 6505*
Lead channel (Crunch, red LED).
Footswitch Modes:
The footswitch can be configured as
an on/off switch (mode 1) or an A/B
channel switch (mode 2). The default
is mode 1. To switch to mode 2, press
and hold the footswitch for 2 seconds
when the pedal is on.
The LED will flash to indicate mode
selection. In mode 2, the pedal cannot
be bypassed; tapping the footswitch
means toggling between channels. To
switch back to mode 1, press and hold
the footswitch for 2 seconds again.
*The mentioned manufacturers and product
names are trademarks or registered trademarks
of their respective owners which were used
merely to identify the sound character of this
product.
