VPRS-430 OPERATION MANUAL
Issue : 2009.03
ED : 1
VPRS-430 OPERATION MANUAL 7 /30
《
Directions in Operation
》
Injury, Electric Shock, Fire
●
Do not run this system in a place with flammable or corrosive gases,
dewdrops or humidity. (It may cause an electric shock or fire.)
●
Do not try to modify this product. (It may cause an electric burn or
fire.)
●
Operate this system under the environmental conditions specified in
this manual. Take particular attention to voltage, frequency,
temperature, humidity and vibrations. (Violating the environmental
requirements may cause an electric shock or fire.)
●
Before connecting the battery wire, load and gronding wire, pay
attention not to reverse the polarity of them. (Polarity reversal may
cause fire.)
●
While the system is on, do not touch the battery wire, load or
grounding wire ports. It may cause an electric shock or short circuit.
●
Pay attention not to reverse polarity of signaling cables and detection
cables when connected. (It may cause a fire.)
●
Do not leave alien materials such as sheathes of electric wires,
screws and so on inside the product. (It may cause an electric shock
or fire.)
●
DC output is connected to the battery before the system starts to be
driven. Pay close attention not to cause an electric shock or short
circuit.
●
When the rectifier units are added, pay close attention as AC input
voltage is fed to the Connector in the Shelf side. (It may cause an
electric shock.)
●
When you take apart or insert a rectifier unit from/to the Shelf, pay
close attention not to have a burn as the part has been heated. (It
may cause an injury.)
●
Do not put your finger or other things to the ractifier unit fan. (It may
cause an injury.)
●
When you extend units, pay close attention not to arise an accident
of short circuit. (It may cause an electric shock.)
