Dong Feng ZB 65, Руководство оператора

Страница: 27 / 55

Factory Direct Tractors
Front End Loader Safety
2. Prior To Each Use:
Conduct the following inspections with the equipment in a safe state – implements lowered to the
ground, tractor park brake engaged, drive disengaged, all controls in neutral, engine shut off and
ignition keys removed.
• Inspect the hoses, seals and couplers for leaks in an effort to avoid the possibility of a
dangerous failure to the hydraulic system. Do not operate your loader if any oil leaks exist.
• Inspect the loader for structural damage such as bends or cracks, loose, missing, or
malfunctioning components in an effort to avoid the possibility of a dangerous failure.
• Tighten any loose parts. Replace any damaged or worn parts. Make sure replaced parts are of
equivalent strength and quality. Be certain any repairs necessary are completed prior to loader
operation.
• Check hydraulic oil level in tractor and top up if necessary (refer tractor manual). Check
lubrication points on loader and lubricate if necessary.
3. When Operating
• Before starting your tractor engine make sure all operating controls are in park lock or neutral
position.
•
protection. See your tractor operator’s manual for correct seat belt usage.
• Be certain all bystanders are clear of the machine and work area prior to operation.
• Operate the loader unloaded to ensure it is in proper operating condition before starting your
work.
• The use of good judgement is necessary by the operator in using this loader. Use extra
caution when rear wheel weights and tyre ballast are added to a loader-equipped tractor. Do
not ram into compacted or frozen piles of dirt or other material with great momentum where
sudden shock loads are encountered. Serious and costly damage may result to both the
loader and the tractor.
• Operate controls only when seated in the tractor’s seat.
• Never lift, hoist, or carry humans in the bucket or on any portion of the loader or loader
attachments.
• Move slowly! Travel speed should be such that complete control and machine stability is
maintained at all times. Where possible, avoid operating near ditches, embankments and
holes. Reduce speed when turning, crossing slopes, and on rough, slick or muddy surfaces.
• Stay off slopes too steep for safe operation. Select low range before travelling up or down a
hill with a heavy load. Avoid “free wheeling”.
• Avoid sudden stops when lowering or lifting the loader boom to prevent loss of control over the
machine and / or loader.
• Never perform maintenance or adjustments on the loader or tractor while in operation.
• A loader attachment should be transported in a low position at slow ground speeds. Make
turns slowly and use the tractor brakes cautiously. A loaded attachment in the raised position
alters the center of gravity of the machine and increases the possibility of mishaps.
S-20