Dong Feng DF254G2-6, Руководство по обслуживанию

Страница: 11 / 67

11
Wear an approved respirator
．
·
lf you use solvent or paint stripper
，
remove stripper with
soap and water before welding
．
Remove solvent or
paint stripper containers and other flammable material
from area
．
Allow fumes to disperse at least 15 minutes
before welding or heating
．
★ ★ ★ ★
Avoid Heating Near Pressurized Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines
，
resulting in severe burns to
yourself and bystanders
．
Do not heat by welding
，
soldering
，
or using a torch near pressurized fluid
lines or other flammable materials
．
Pressurized
lines can be accidentally cut when heat goes beyond the
Immediate flame area
．
★
★ ★
★
Store Attachments Safely
Stored attachments such as dual wheels
，
cage wheels
，
and loaders can fall and cause serious injury or death
．
Securely store attachments and implements to prevent
falling
．
Keep playing children and bystanders away from storage area
．
★ ★ ★ ★
Prevent Acid Burns
Sulfuric acid in battery electrolyte is poisonous
．
It is strong
enough to burn skin
，
eat holes in clothing
，
and cause
blindness if splashed into eyes
．
Avoid the hazard by
：
1
．
Filling batteries in a well-ventilated area
．
2
．
Wearing eye protection and rubber gloves
．
3
．
Avoiding breathing fumes when electrolyte is added
．
4
．
Avoiding spilling or dripping electrolyte
．
5
．
Use proper jump start procedure
．
If you spill acid on yourself
：
1.Flush your skin with water
．
2
．
Apply baking soda or lime to help neutralize the acid
．
3
．
Flush your eyes with water for 15
—
30 minutes
．
Get medical attention immediately
．
If acid is swallowed
：
1
．
Do not induce vomiting
．
2
．
Drink large amounts of water or milk
，
but do not
exceed 2 L(2 quarts)
．
3
．
Get medical attention immediately
．