Page 9/11
17. Repeat all these steps for the three other Bunk Safety Rails (N) with both End Panels
(G&H).
18. Align the 3 - holes in the Vertical Support Bar (F) with the holes in the Upper Bunk Bed
Mattress and Safety Rails (J&N).
19. Insert Machine Screw (7) through the Support Bar and the Bed / Safety Rail and into the
Female Hex Nut (8).
20. Tighten with the Allen Key (4) provided.
21. Repeat all steps with the other Support Bar (F) on the opposite side of the Upper Bunk
Bed.
8
7
7
7
7
8
8
N
N N
N
N
9
5
5
5
5
5
3
3
3
3
5
4
F
F
F
F
F
N
8
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
15.Insert 1 - Furniture Screws (5) into the hole on the outside of the End Panel (H) and into
the end of the Safety Rail (N).
16.Tighten using the Allen Wrench provided.
12. Align the Wooden Dowels (9) in the end of the Upper Bunk Safety Rails (N) with the holes
in the Outside Bunk Bed End Panel (G) and the Inside Bunk Bed End Panel (H).
13. Insert the Wooden Dowel (9) in the Upper Bunk Safety Rails (N) into the hole in the inside
End Panel (G & H ).
14. Insert 1-Furniture Screws (3) into the hole on the outside of the End Panel (
G
) and into the
end of the Safety Rail (N).
ASSEMBLY INSTRUCTIONS
# 9018 ARTESIAN STAIR BUNK
8
8
8
8
8
8