Donati CBE Series, Инструкция по использованию

Страница: 63 / 80

INSTALLATION, USE AND MAINTENANCE
GBA-GBP-CBE-MBE SERIES
59
•
NEVER use the crane in areas where the use of non-explosive components is required.
•
NEVER make the limit switches or load limiter trip continuously.
•
NEVER
reach the “stroke end” areas at full speed in traverse and rotation movements.
•
NEVER use the crane in the presence of a sharp mains voltage drop or if one of the three phases is
missing.
•
NEVER perform abrupt changes in direction in the lifting, traverse and rotation manoeuvres.
•
NEVER repeatedly activate the pushbutton panel control buttons.
•
NEVER change the functional and performance characteristics of the crane and/or its components.
•
NEVER tamper with the settings of the safety devices (limit switches, clutch device ) - (fig. 94)
•
NEVER perform temporary repairs or reset interventions not in compliance with the instructions.
•
NEVER use non-original spare parts or those not prescribed by the manufacturer.
•
NEVER entrust extraordinary maintenance and repair operations to personnel not instructed by the
manufacturer.
•
NEVER leave the crane at the end of work without having put the safety procedures into place (fig.
95).
•
NEVER perform, maintenance, inspections or repairs without turning off the crane.
•
During maintenance phases, NEVER : (fig. 96)
o
use unsuitable tools
o
lean ladders on the column, hoist, trolley or crane arm
o
work without personal protection equipment
o
intervene without having removed the lifted load
•
NEVER use the crane if it is not perfectly compliant in all its operating functions.
fig. 91
fig. 92
fig. 93
fig. 94
fig. 95
fig. 96