Torit PowerCore, TG 2 to TG 12
8
Cleaning Controls
There are 14 standard options that are offered with this
collector.
Integrated Torit Delta P
• Manual Motor Control (Standard Control Feature)
• 24VDC Start/Stop and feedback relay, and
Manual Motor Control
Integrated Torit Delta P Plus
• Manual Motor Control
• 24VDC Start/Stop and feedback relay, and
Manual Motor Control
External Remote-Mount Torit Delta P
• Manual Motor Control
• 24VDC Start/Stop and feedback relay, and
Manual Motor Control
• Manual Motor Control and Particulate Sensor
• Manual Motor Control and Airflow Controller
(VFD)
• Manual Motor Control, Airflow Control (CFD), and
Particulate Sensor
External Remote-Mount Torit Delta P Plus
• Manual Motor Control
• 24VDC Start/Stop and feedback relay, and
Manual Motor Control
• Manual Motor Control and Particulate Sensor
• Manual Motor Control and Airflow Controller
(VFD)
• Manual Motor Control, Airflow Control (CFD), and
Particulate Sensor
The standard controller is the Integrated Torit Delta P
with Manual Motor Starter.
Note:
Reinforced collectors and collectors being
located outside require external remote-mount
controllers.
Delta P Control
The Torit Delta P Controller monitors the differential
pressure between the clean and dirty air plenums,
providing a visual display of the filter condition. It
controls the pressure drop by turning the cleaning
mechanism On and Off at the chosen limits. There are
three (3) set points: High Pressure On, Low Pressure
Off, and Alarm. The first two, High Pressure On and Low
Pressure Off, control the filter cleaning system. The third,
Alarm, provides a relay output to activate an external
alarm supplied by others.
For complete information, see the most current version
of the Delta P Installation, Operation, and Maintenance
manual.
Delta P Control Display
