Donaldson BOFA AD 350, Руководство пользователя

Страница: 11 / 23

Installation
Connection to Power Supply
Please follow the above specification at the rear of this
manual when selecting the power supply outlet for the
system, ensure the power supply is suitable before
connecting the system.
Check the Integrity of the electrical power cable, if the
supply cord is damaged the extraction unit should not be
connected to the mains. The supply cord should only be
replaced by a BOFA engineer as an electrical safety test may
be required after replacement.
The unit MUST be connected to a properly earthed outlet.
If your system was ordered with any optional extras
please read section
4.03 before the power connection is
made as additional connections may be required before
power is connected to the extractor.
Connect the power cable to an isolated electrical supply.
The mains socket should be installed near the extractor it
should be easily accessible and able to be switched On/ Off.
The cable run should be arranged so as not to create a trip
hazard.
02
4