Donaldson Torit PowerCore VH 1-4, Инструкция по установке и эксплуатации

Страница: 13 / 44

10
Torit PowerCore, Model VH and VL 1-4 through 3-30
Inlet and Outlet (where available) Manifold Installation
Inlet Manifold (Standard) or Outlet Manifold
(optional where available) Installation
1. Inlets, inlet and outlet manifolds are to be installed
following field installation of hopper and legs and
anchoring of collector.
2. Lift and install individual inlets referencing assembly
drawings shipped with collector.
The inlet and outlet manifolds are
considered part of the duct system
and must be supported in the field by others.
inlets
Step 2 Step 3
Step 4
inlet
manifold
outlet manifold
3. Lift inlet manifold and bolt to individual inlets
referencing assembly drawing shipped with
collector.
Tighten all hardware and
support inlet manifold before
removing crane to prevent personal injury and/
or property damage.
Inlet and outlet manifolds are considered part
of the duct system and must be supported in
the field by others.
4. Lift outlet manifold and bolt to collector referencing
assembly drawing shipped with collector.