manualshive.com logo in svg

Donaldson Torit FKB, Инструкция по эксплуатации

Поделиться
Скачать
Donaldson Torit FKB Скачать руководство пользователя страница 9

Engine Air Filtration

   •   

87   

MEDIUM DUST AIR CLEANERS

www.buydonaldson.com

Install the Primary 

Filter

Install the new primary filter by 
pressing and rotating the filter 
clockwise until fully fitted against 
the stop.

Fasten the Service 

Cover   

The “INLET” arrow on 
the cover should line up 
with the air cleaner inlet. 

Do not force the cover 
onto the air cleaner. It 
should go on easily with 
no extra force.

Re-fasten the latches which 
secure the cover. Make sure that 
latches penetrate the slots in both 
the body and the cover.

Reset the Filter 

Indicator and Inspect 

the Air Cleaner System   

If your system has a restriction 
indicator, reset the device. 

Inspect and torque all clamps, 
bolts and connections in the entire 
air intake system. Check for holes 
in piping, and repair if needed.

Close-up of Filter Stop 

9

8

FKB Air Cleaners

Service Instructions

Note: If you perform filter maintenance service on a schedule vs. using service indicators, you may want to write 
the service date on the filter end cap.   

Note: If the cover does not fit flush to the body, the primary filter is not properly seated in the housing.  
Recheck the primary and safety filter installation following the proper installation procedure so they become 
fully seated. 

10

Содержание FKB





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды