background image

The Donaldson Torit Warranty

Donaldson warrants to the original purchaser that the major structural components of the goods will be free 

from defects in materials and workmanship for ten (10) years from the date of shipment, if properly installed, 

maintained and operated under normal conditions.  Donaldson warrants all other Donaldson built components 

and accessories including Donaldson Airlocks, TBI Fans, TRB Fans, Fume Collector products and Donaldson built 

Afterfilters for twelve (12) months from date of shipment.  Donaldson warrants Donaldson built filter elements to 

be free from defects in materials and workmanship for eighteen (18) months from date of shipment.  Donaldson 

does not warrant against damages due to corrosion, abrasion, normal wear and tear, product modification,

or product misapplication. Donaldson also makes no warranty whatsoever as to any goods manufactured or 

supplied by others including electric motors, fans and control components.  After Donaldson has been given 

adequate opportunity to remedy any defects in material or workmanship, Donaldson retains the sole option to 

accept return of the goods, with freight paid by the purchaser, and to refund the purchase price for the goods 

after confirming the goods are returned undamaged and in usable condition.  Such a refund will be in the full 

extent of Donaldson’s liability. Donaldson shall not be liable for any other costs, expenses or damages whether 

direct, indirect, special, incidental, consequential or otherwise. The terms of this warranty may be modified

only by a special warranty document signed by a Director, General Manager or Vice President of Donaldson. 

To ensure proper operational performance of the equipment, use only genuine Donaldson replacement parts. 

THERE EXIST NO OTHER REPRESENTATIONS, WARRANTIES OR GUARANTEES EXCEPT AS STATED IN THIS 

PARAGRAPH AND ALL OTHER WARRANTIES INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE, WHETHER EXPRESS OR IMPLIED ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED.

Donaldson Company, Inc. is the leading designer and manufacturer of dust, mist, and fume collection 
equipment used to control industrial-air pollutants. Our equipment is designed to help reduce 
occupational hazards, lengthen machine life, reduce in-plant maintenance requirements, and 
improve product quality.

Parts and Service

For genuine Donaldson replacement filters and parts, call the Parts Express Line.  For faster service,
have unit’s model and serial number, quantity, part number, and description available.

Donaldson Australasia
Tel:  1800 503 878 (AU)
Tel:  0800 743 387 (NZ)
Website: www.donaldsonfilters.com.au
Donaldson China
Tel: 400 820 1038
Website: www.donaldson.cn

Donaldson Japan
Tel: +81 42 540 4114
Website: www.donaldson.co.jp

Donaldson Korea
Tel: +82 251 733 33
Website: www.donaldson.co.kr

Donaldson South Asia
Tel: +91 124 480 7536
Website: www.india.donaldson.com

Donaldson Southeast Asia
Tel: +65 6349 8168
Website: www.asia.donaldson.com

Donaldson USA
Tel: +1 800 365 1331
Website: www.donaldsontorit.com

Donaldson Europe
Tel: +32 16 383 811
Website: www.donaldson.com

© 201

8

 Donaldson Company, 

Inc.  Printed in APAC 

IOM AK0303601

, Revision 0 

Jan.2018

Содержание Downflo Evolution DFEP4
































Отзывы: