background image

8

Donaldson Company, Inc.

Platform and Ladder 

Collector may be equipped with a ladder and platform system for gaining access to the clean air plenum for filter bag changeout. 

For all ladders over 24-ft OSHA requires a ladder safety system or personal fall arrest system. As a convenience, Donaldson offers 

ladder safety systems as an option.

Explosion Relief Panels

Collector may be equipped with optional explosion relief panels to support a process owners combustible dust mitigation strategy. 

Explosion vent sizing follows NFPA-68 formulas assuming outdoor location of collector with no duct or obstruction on the explosion 

vent panels. Contact Donaldson Torit for explosion venting requirements for other conditions.

Sprinkler Coupling 

Sprinkler couplings are provided for the convenience of fire control system installers. The fire control system installer shall make 

their own decisions on the appropriate location of fire control system components.

Water Overflow Valve 

An optional means to allow water evacuation.  Some method of water evacuation must be provided if a water based extinguishing 

system is installed on the collector.

Cleaning Controls and Sensors

Magnehelic

®

 Gauge 

Simple mechanical gauges that measure differential pressure. May be passive mechanical versions or digital, may include 

electrical contacts and user adjustable setpoints. 

Hopper Discharge Accessories 

Hopper Transition 

The collector comes with a standard size hopper outlet. Donaldson offers optional hopper outlet transitions to match up with 

various dust disposal devices.

Live Bottom Hopper

Short section of screw conveyor with a round to rectangle transition that handles tough dusts that bridge easily. 

Rotary Airlock (RAL) 

Used to isolate the dust collection system pressure from atmosphere. Options include flexible wipers, NFPA rated valves, 

Pneumatic conveying ready valves, and high clearance valves for tough to handle dusts. 

Screw Conveyor 

Can be mounted directly to the hopper outlet with the addition of an RAL at the discharge. Useful for loading bulk containers while 

maintaining a shorter overall height. 

Options and Accessories

Содержание 252LP

































Отзывы: