DOMUSA TEKNIK EVOLUTION EV 25 HAM, Инструкция по установке и эксплуатации

Страница: 11 / 44

9
4.4 Double conduit to coaxial exhaustion transformation
The boiler Evolution is given prepared for the exhaustion of the products of combustion and air
intake by means of the system of double conduit of Ø80. When you want to carry out the exhaustion
of combustion gases by means of coaxial tube of Ø80/125, you will use for it a Kit adaptor for coaxial
tube Ø80/125 (given under order) Code CGAS000213
Kit adaptor for coaxial tube
∅
80/125
Cod. CGAS Cod. CGAS000222
The transformation will be able to realize with two different mounting setups:
1. Back exit: it will be enough with disassembling the combustion air intake of the boiler,
unscrewing the three screw, mount the adaptor in the exit of flue gases of the boiler backwards
and using the flexible tube of entry of air, connect it to the adaptor.
2. Lateral or upwards exit: it will be realized in the same way, but to mount the adaptor kit laterally
it is necessary to mount an elbow of 90º Ø80 (code CGAS000147), before the adaptor in the exit
of flue gases.
In the following pictures they can observe both setups:
Combustion air intake
Rear outlet
Side outlet
90º Ø100 elbow