6
1.- INSTALLATION
1.1.- Installation diagram
See Figure 1
1.2.- Positioning
The washing machine must be firmly secured on the floor, which will support the
its weight and the residual force generated while spinning.
After unpacking the washing machine, the pieces that secure the free-floating part
and the chassis during transportation should be removed. In order to do this, the front and
back panels should be removed to access the fixing elements. They are easily seen as they
are red.
It is advisable to secure the washing machine with the screws provided with it. In
order to do so, plastic plugs must be inserted into the previously drilled holes (Fig. 2).
The washing machine must be correctly levelled leaving a space at the back to
facilitate its maintenance.
1.3.- Water connection
If only cold water is available, water connection is carried out as shown in Figure 3.
If hot water is available, connection will be performed as shown in Figure 4. If decalcified
water is also available, connection will be performed as shown in Figure 5.
Necessary dynamic pressure: 2
÷
4 Kg/cm
2
.
1.4.- Steam connection
If steam is available, heating of washing water will be injected directly. The
connection diagram is shown in Figure 6.
Steam pressure: 2
÷
4 Kg/cm
2
.
After steam has been introduced into the machine for the first time, it is advisable
for the steam hose nuts to be re-tightened.
1.5.- Drainage
Fix the drainage bend pipe as shown in Figure 7.
