EN
CF18 – CF60
Operation
21
7.10
Replacing the AC fuse (CF35, CF40, CF50, CF60)
D
➤
Pull off the connection cable.
➤
Pry out the fuse insert (fig.
6
2, page 11) with a screwdriver.
➤
Replace the defective fuse with a new one that has the same rating (T4AL 250 V).
➤
Press the fuse insert back into the housing.
7.11
Replacing the DC plug fuse
➤
Pull the adapter sleeve (
4
) off of the plug.
➤
Unscrew the screw (
5
) out of the upper half of the housing (
1
).
➤
Carefully raise the upper half of the housing from the lower (
6
) half.
➤
Take out the contact pin (
3
).
➤
Replace the defective fuse (
2
) with a new fuse of the same type and rating (8 A
32 V).
➤
Re-assemble the plug in the reverse order.
I
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
NOTE – Internal DC fuse
There is an additional DC fuse inside the device (Automotive standard
blade fuse, 10 A). This fuse can only be replaced by an authorised repair
centre.
1
2
3
4
5
6
9
CF18-CF60-O-AUS.book Seite 21 Dienstag, 17. September 2019 8:49 08
