Dometic TROPICOOL Series, Руководство по эксплуатации

Страница: 16 / 232

EN
Operation TCX07, TCX14, TCX21, TCX35
16
TCX14, TCX21, TCX35
➤
If you wish to switch between cooling and heating , press the button “HOT/
COLD”.
I
✓
The red or blue operating display lights up and the device starts to cool/heat.
➤
When you want to finish the cooling or heating process, press the button “
P
”.
➤
When you stop using the cooling device, disconnect it from the mains.
6.8 Selecting the temperature (TCX14, TCX21, TCX35)
The set temperature status display (fig.
3
5, page 3) indicates the selected
temperature. With an increasing number of illuminated LEDs, the cooling or heating
intensity also increases.
I
Temperature at interior space center at approx. 25 °C ambient temperature:
➤
To select the cool or heat temperature, press the “ ” button repeatedly until the
desired number of LEDs are illuminated.
NOTE
The control unit of the cooling device has a memory function.
It memorises the selected temperature range for each mode (cooling
and heating). Thus the temperature range which was previously
selected in the respective mode is set again with each switching on or
switching over.
NOTE
The following temperature indications are subject to tolerances and are
dependent on the measuring position.
Status display
(fig.
3
5, page 3)
Interior temperature
Cooling
7 illuminated LEDs approx 1 °C (TCX14)
approx 3 °C (TCX21, TCX35)
1 illuminated LED approx 16 °C (ECO mode)
Heating
7 illuminated LEDs approx 65 °C
1 illuminated LED approx 48 °C
TCX07-TCX35-OPM-EMEA16.book Seite 16 Donnerstag, 11. Juli 2019 12:20 12