4
EN
Pre-Installation
Slide Topper
Required Topper
Bracket Set
1
Part Number
Quantity
Topper Short (Wall)
Bracket with Hardware
98000(LL).401(#)
2
Topper Tall (Wall)
Bracket with Hardware
98000(LL).402(#)
2
1
A Topper bracket set (not included) is required. Choose the set that permits
the minimum clearances to be met for your specific application.
Slide Toppers that are 198 in. (503.0 cm) to 259 in.
(657.9 cm) require the following kits:
• A second anti-billow stop kit (one at each end cap)
• A second anti-billow bracket kit (one at each end cap)
• One (1) cradle kit for center support of the Fabric
Roller Tube Assembly (FRTA)
In addition to the above, it is recommended that Slide
Toppers that are 260 in. (660.4 cm) or wider install a
second cradle kit.
Optional Kits
Part Number
Quantity
Mounting Bracket Spacer Kit
0.75 in. (19 mm) thick
3107940.003
1
Mounting Bracket Spacer Kit
0.50 in. (13 mm) thick
3310066.000#
1
Anti-Billow Stop Kit
3109252.XXX#
1
Anti-Billow Bracket Kit
3107198.XXX#
1
Cradle Kit
3309526.XXX#
1
Optional Components
Part Number
Quantity
Awning Rail
3106774.XXX-#
1
Awning Rail 20 ft. (6.1 m)
(20 pack)
3106774.262-#
1
Oscar Rivet (10 pack)
113008P10
1
Oscar Rivet (100 pack)
113008P100
1
Recommended Tools
Drill
Flat Screwdriver
3/16 in. (4.7 mm) Drill Bit
7/16 in. (11 mm) Drill Bit
Sealant
File
Measuring Tape
2.2 Identifying the Model
This section describes the breakdown of the model
identification numbers.
Hardware
98000LL . 40Y #
Hardware Color
1 = Tall, 2 = Short
Extension (15, 18)
FRTA
98X 0Z YY . LLL #
Color
Length
Fabric Color
0 = No Rail Included, 1 = Rail Included
Number of Slats
Intended Use
This Slide Topper is designed and intended for use on a
recreational vehicle (hereinafter referred to as “RV”). Use
these instructions to ensure the correct installation and
function of the product.
The manufacturer accepts no liability for damage in the
following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical
influences and excess voltage
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in the
operating manual
Dometic Corporation reserves the right to modify
appearances and specifications without notice.
3 Pre-Installation
Use this section to mark the location of the mounting
brackets that were selected for the installation of the
Slide Topper and prepare the hardware for assembly.
