3
CLEARANCES
Minimum clearances in inches to combustible materials are:
Top
4”
Side
1”
Rear
1”
Bottom The feet must be in place to
ensure free air circulation.
NOTE:
DO NOT install the appliance directly on carpeting.
Carpeting must be removed or protected by a metal or wood
panel beneath the appliance, which extends at least the full
width and depth of the appliance.
1 ”
1 ”
1 ”
INSTALLATION
I
n the U.S. the installation must conform with:
National Fuel Gas Code, ANSI Z223.1/NFPA 54
1.
(latest edition).
Recreational Vehicles Code, ANSI A119.2 (latest edition)
2.
Manufactured Home Construction and Safety Standard,
3.
Title 24 CFR, Part 3280.
If an external electrical source is utilized, the refrigerator, when
installed, must be electrically grounded in accordance with lo-
cal codes or, in the absence of local codes, the National Electri-
cal Code, ANSI/NFPA 70 - (latest edition).
In CANADA, the installation must conform with:
Natural Gas and Propane Installation Code, CSA B149.1
1.
CSA Z240 RV Series, Recreational Vehicles.
2.
Current CSA Z240.4, Gas-equipped Recreational Vehicles
3.
and Mobile Housing.
If an external electrical source is utilized, the refrigerator,
when installed, must be electrically grounded in accordance
with local codes or, in the absence of local codes, the Canadian
Electrical Code, CSA C22.1, Parts I and II - (latest edition).
INfORmATION
This appliance is designed for storage of foods, frozen foods and making ice. It is certified under the latest edition of ANSI
Z21.19•CSA 1.4 Refrigerators using gas fuel, for a free-standing installation.
The installation must conform with local codes, or in absence of local codes, the following standards as applicable.
fREE-STANDING mODEL fOR fLOOR
INSTALLATION ONLy
The room must be well ventilated and not used as a bedroom.
Further the room should have a window (which can be opened)
or a door to the outside.
For best performance also at high ambient temperatures there
must be a free air circulation over the cooling unit at the rear
of the refrigerator. Ensure that there is a free space of at least 4
inches (100 mm) above the refrigerator and that the ventilation
opening on the top of the cabinet is not covered in any way.
Do not place the refrigerator in a space where air circulation is
restricted. A clearance of at least 1-inch (25 mm) should be left
between the rear and sides of the refrigerator and the surround-
ing walls.
This freestanding refrigerator requires accessibility to the back
for servicing the gas equipment. If allowed by the Local Au-
thorities, the accessibility can be obtained by using a certified
Flexible Metal Connector of Gas Hose Assembly, which would
allow the refrigerator to be withdrawn without disrupting the
gas supply. However, if the Local Authorities require a rigid
gas supply connector the refrigerator should be located with
sufficient space at the back for servicing or, if located against a
wall, a removable panel of a minimum size of 16” x 20” should
be provided in the wall to allow access to the rear of the refrig-
erator. The refrigerator must be adjusted to a vertical position
in both directions. Use the feet on the refrigerator to adjust its
position.
FrOm AbOvE
Wall
Rear
Wall
FrOm ThE SIDE
At least 1”
(25 mm)
