TroubleShooTinG GuiDe
toilet base asseMbly
Problem
Possible Cause
Service instructions
1. Water does not enter bowl
and toilet does not flush.
2. Water enters toilet bowl, but
toilet does not flush.
a. Toilet fuse is blown or circuit
breaker is tripped.
b. Loose wiring connections.
c. Incorrect wiring of toilet to
incoming power.
d. Defective diode between terminal
block pins 9 and 4.
a. Electrical failure from flush switch
to toilet.
b. Flush switch may be defective.
c. Loose flush ball motor wires.
d. Defective flush ball motor.
e. Flush ball motor drive arm failure.
f. Drive linkage failure.
a. Check toilet fuse or circuit
breaker.
b. Check for loose or defective
wiring at terminal block pins 9
and 0.
c. Check for reverse polarity of
incoming power.
d. Replace defective diode.
a. Check for loose or defective
wiring between flush switch and
terminal block pins 2 and 4.
b. Replace if necessary.
c. Check for loose wires at termi
-
nal block pins 2 and 10.
d. Replace if necessary.
e. See page 15 for replacement
instructions.
f. See page 15 for replacement
instructions.
