EN
RPD190, RPD 218
Installing and connecting the refrigerator
13
Key to fig.
3
, page 12
Observe the following instructions when installing:
•
Install the refrigerator so that the hot air produced can easily flow away. To
achieve this make sure there is adequate ventilation (fig.
3
, page 12).
•
Allow the device to rest in a vertical position for at least four hours before you
connect it to the power supply so that the oil can flow back into the compressor.
No.
Description
Action
1
Compressor shelf – produces heat
–
For optimum performance at high ambient temperatures:
2
Cool intake air – external vent
Fit inlet vent to exterior wall – position
below compressor shelf
3
Hot waste air – external vent
Fit outlet vent to exterior wall –
position above compressor shelf
For low to moderate ambient temperatures:
4
Cool intake air grille
–
5
Hot waste air grille
–
RPD190-218--IO-AU.book Seite 13 Montag, 24. Oktober 2016 5:08 17
