Dometic RMDT 8501, Руководство по установке

Страница: 22 / 56

20
* Qualified personnel are accredited experts who are
able, by virtue of their training and knowledge, to
install the appliance correctly.
4.9 Electrical installation
The electrical installation shall be carried
out by qualified personnel* only.
WARNING!
4.9.1 Mains connection
We recommend leading the power supply via
a board-side fuse protection
Installation
The electrical installation must be in
accordance with the national regulations
of the respective countries.
The connection cables must be routed in
a way to prevent contact with hot com-
ponents of the unit/burner or with sharp
edges.
Changes to the internal electrical instal-
lation or the connection of other electri-
cal components (e.g. external fan) to the
internal wiring of the appliance will ren-
der the e1/ CE admittance as well as any
claims from warranty and product liabili-
ty void!
The power should be supplied by a pro-
perly grounded socket outlet or a groun-
ded non-detachable connection. Where
a socket outlet with mains supply is
used, the outlet must be freely accessi-
ble.
Should the connection cable be dama-
ged, have it replaced by Dometic
Customer Services or by qualified per-
sonnel to avoid hazards.
The appliance is operated using the gases and
inlet pressures stated below. The pressure
reducing valve between the gas cylinder and
oven to be used must comply with the catego-
ries stated in the following table.
4.8.1 Connection pressure and
gas categories
Category
Country
Pressure in mbar Gas
I3B / P(30) 30 Butan
AT,CH,DE,DK,FI,NL,
NO,SE
30 Propan
I3+ (28-30/37) 28-30 Butan
BE,CH,ES,FR,GB,GR,
IE,IS,IT
37 Propan
Burner Category Nozzle type
Ofenbrenner
(1,2 kW)
I3B / P(30)
53
Grillbrenner
(1,6 kW)
I3+ (28-30/37)
62
Tab. 1
Tab. 2
Gas categories
Oven burner features
289 0318-40_EN_RMDT85xx-Installation_N1.qxp 02.07.2012 10:00 Seite 20