Dometic RM 5310, Руководство по установке, Страница: 37 / 92

EN
RM5310, RM5330, RM5380 Changing the door hinge
37
➤ Fit the ventilation grille LS100 ( 9 ) in the installation frame ( 6 ) and lock it
in place.
➤
Push the covering cap ( 8 ) onto the exhaust gas pipe ( 7 ).
➤
Fit the insert for the exhaust gas routing ( 10 ) into the ventilation grille ( 9 ).
6.6 Fastening the refrigerator
!
I
➤
Place the refrigerator in its final position.
➤
Turn the four bolts through the four plastic bushings into the side walls of
the refrigerator (fig.
d , page 6) and on into the wall of the recess.
7 Changing the door hinge
➤
Release the bolts on the door lock (fig. e , page 7) and remove the bolt,
the door lock and the spacer.
➤
Remove the bolt on the other side and keep it (fig. f , page 7).
➤
Lift the door and remove it (fig. g , page 7).
➤
Release the cap (fig. h , page 7) and replace it on the other side of the
door (fig. i , page 7).
➤
Unscrew the hinge pin (fig. j , page 7) and replace it on the other side
(fig. k , page 7).
➤
Place the door on the hinge pin (fig. l , page 7).
➤
Fasten the bolt to the upper door hinge (fig. m , page 8).
➤
Attach the door lock (fig. n , page 8).
CAUTION!
Always drill through the bushings provided, as foamed-in parts
such as cables etc. could be damaged otherwise.
NOTE
Fasten the side walls or attached bars in such a way that the bolts
are firm even under increased loads (while the vehicle is driving).