background image

5

Use the 

Airing Position Card 

to keep the doors ajar if the re-

frigerator will not be in use for an 

extended period of time or put in 

storage.

AIRING POSITION CARD

1

5

2

3

4

The exterior of the refrigerator should be wiped clean now 

and then, using a damp cloth and a small quantity of de-

tergent. But not the door gasket, which should only be 

cleaned with soap and water and then thoroughly dried.

The cooling unit behind the refrigerator should be cleaned 

with a brush from time to time. Make sure that the refrige-

rator is switched off when doing this!

TURNING OFF THE REFRIGERA-

TOR

To turn off the refrigerator, turn knob (

A

) to “OFF” 

position.

If the refrigerator is not to be used for some time:

1.  Turn knob (

A

) to “OFF” position.

2.  Shut off any on-board valve in the gas line to 

the refrigerator.

3.  Empty the refrigerator. 

4.  Defrost and clean it as described in sections 

DEFROSTING

” and “

CLEANING THE REFRIG-

ERATOR

”. 

5.  Leave the doors ajar.

PRODUCT CARE - SOME USEFUL 

HINTS

Make sure that:

• 

The refrigerator is not operating on 12V when the ve-

hicle is parked; otherwise you will drain the car battery 

in a short time.

• 

Defrosting is carried out periodically.

• 

The refrigerator is clean and dry with the door left open 

when it is not to be used for some time. 

• 

Liquids or items with a strong odor are well packed.

• 

The ventilation openings are unobstructed.

• 

The door is secured by means of the travel catch when 

the motor home / caravan is on the move.

TROUBLESHOOTING

IF THE REFRIGERATOR FAILS TO WORK

Check  the  following  points  before  calling  a  service 

 

technician:

• 

The “STARTING THE REFRIGERATOR” instructions 

have been followed.

• 

The refrigerator is level.

• 

If it is possible to start the refrigerator on any of the con-

nected sources of energy.

• 

If the refrigerator fails to work on gas, check:

 -

That the gas bottle is not empty.

 -

That all LP-gas valves are open.

• 

If the refrigerator fails to work on 12V, check:

 -

That the 12V supply is connected to the refrigerator.

 -

That the fuse on the 12V supply is intact.

 -

That the battery is not run down.

• 

If the refrigerator fails to work on 230-240V, check:

 -

That the 230-240V supply is connected to the refri-

gerator.

 -

That the fuse is intact.

Содержание RM 4601













Отзывы: