EN
proSafe
Installing safe
9
7
Installing safe
7.1
Notes on installation
A
Follow the instructions when installing.
•
Carefully check the safe for damage once you have removed it from the
packaging. If there is visible damage, contact the manufacturer (see back for
addresses).
•
Install the safe on a flat and even surface.
•
Select a location for installation which is a sufficient distance from heat sources
(e.g. radiators). Avoid installing in locations with temperatures of under 0 °C and
over 45 °C.
•
Avoid damp ambient conditions (e.g in the bathroom and swimming pool) in
order to avoid condensation forming in the device.
•
Select a fastening material (screws with plugs, if necessary) which is appropriate
for the base.
•
For safes with sockets (optional), ensure that they are located close to a socket to
which the safe can be attached.
•
For safes with sockets (optional) there must be a clearance of 20 mm at the back
for the connection cable.
NOTICE!
The safe must only be installed by qualified specialists.
MD-IO-16s.book Seite 9 Freitag, 4. August 2017 9:25 09
