EN
proSafe
Using the safe
23
➤
Press the
ENTER
button.
✓
The display shows the message
REPEAT
.
➤
Press the
ENTER
button.
➤
Repeat the entry of the new six digit anti-tamper code within ten seconds
➤
Press the
ENTER
button again.
✓
The safe confirms the change of the anti-tamper code with an audio tone.
Using the master key with the anti-tamper system
You can open the safe in any situation using the master key, even, for example, in the
event of an electronic fault.
A
➤
Remove the plastic cover concealing the key hole (fig.
1
5, page 3).
➤
Insert the master key into the lock.
➤
Open the safe by turning the master key 180° to the right (fig.
4
, page 4).
✓
The display shows the message
A-002
.
✓
Turn the master key 180° to the left and remove the master key.
✓
The safe is blocked by the anti-tamper system.
I
➤
Reattach the plastic cover.
NOTICE!
No unauthorised persons should have access to the master key.
Store the master key very carefully in a safe location.
NOTE
When you press the
ENTER
button on the blocked safe three short
beeps will sound. When you press
ENTER
again the display shows the
message
CODE
.
MD-IO-16s.book Seite 23 Freitag, 4. August 2017 9:25 09
