3. USE
EN
9
When using the grill the door must be kept open and with the heat guard fully
extracted (FIG. 1 – PG. 19).
Never use the grill for more than 25 minutes. The grill cannot be used as an oven.
If the burner flame goes out accidentally, turn off the gas knob and wait one minute
before re-igniting.
3.5.1
Electronic ignition grill
WARNING
WARNING
Do not ignite the grill burner with the door closed.
To ignite the burner, gently push in and turn the control knob to position GRILL or HIGH FLAME and, keeping
the knob pushed in, at the same time press the electronic ignition button (for models with the symbol
affixed to the door, the ignition button is not visible and is activated by pressing the knob down). Once the
burner is lit, keep the knob pushed in for a few seconds to ensure the flame remains lit.
CAUTION
CAUTION
If the burner does not ignite immediately, repeat ignition after having followed each
step below:
• proceed with manual ignition
• check there is sufficient gas in the gas bottle.
If the appliance still does not ignite, shut off the gas supply at the main gas tap and
contact your local dealer.
3.5.2
Manual ignition grill
Manual ignition when the appliance is not fitted with the electronic ignition feature or in the event of failure
in the electronic ignition.
To ignite the burner, gently push in and turn the control knob to position GRILL or HIGH FLAME and, keeping
the knob pushed in, at the same time light the burner with a match or gas lighter. Once the burner is lit, keep
the knob pushed in for a few seconds to ensure the flame remains lit.
CAUTION
CAUTION
If the burner does not ignite immediately, check there is sufficient gas in the gas
bottle.
If the appliance still does not ignite, shut off the gas supply at the main gas tap and
contact your local dealer.
3.5.3
Flame regulation grill
For models CU311 - CU311M - CU333 - CU333M - CU335 - CU335M - FO311:
the grill is to be used only at its maximum capacity.
For all other models:
to regulate flame, turn the knob to the desired cooking flame.
Содержание PI8002
