![Dometic PI8002 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/dometic/pi8002/pi8002_installation-user-and-service-manual_2518555010.webp)
3. USE
10
IT
EN
3.6
Electric hotplate (depending on model)
CAUTION
CAUTION
Before turning on the electric hotplate (or if the hotplate has remained unused for a
long time) it is necessary to eliminate any moisture by turning on the hotplate and
leaving it on for 30 minutes with the corresponding knob in position 1.
Use pans with flat bottoms and with diameters no less than the diameter of the
hotplate.
Dry the bottom of the pan before placing it on top of the hotplate.
When using the hotplate do not leave the appliance unattended and make sure
children are nowhere near the appliance.
The electric hotplate is controlled by a 7-position knob: position off is 0 (zero) whereas positions 1 to 6 are
for regulating the hotplate. Positions 1 to 6 correspond to an increase in temperature of the hotplate. There
is a red LED positioned next to the knob which lights up when the hotplate is on.
3.7
Spit (depending on model)
Ignite the oven as described in the chapter 3.4 Oven. Turn the gas knob to the required position. Insert the
drip tray with the spit already installed as illustrated in FIG. 2 - PG. 19. Press the spit button to turn on the
spit motor.
3.8
Turntable (depending on model)
Ignite the oven burner as indicated in chapter 3.4 Oven. Insert the turntable as indicated in FIG. 3 - PG. 19
Press the switch to operate the turntable motor.
3.9 Cleaning
No regular maintenance is required except cleaning.
WARNING
WARNING
Some cooking operations generate a considerable amount of grease. This, combined
with spillage, can became a hazard if allowed to accumulate on the appliance through
lack of cleaning.
CAUTION
CAUTION
Keep the appliance clean and in good working condition. To clean below the hotplate
burners, remove the burner cap screws using a suitable screwdriver. Once the
screws are removed, the burner cap and burner head can be removed to provide
access below the burner. Once cleaned, ensure the burner head and burner cap are
refitted. It is recommended to have it serviced annually by authorized personnel.
WARNING
WARNING
Before cleaning the appliance always turn it off and disconnect from power supply
and wait until it has cooled down.
Содержание PI8002
