Dometic PerfectView CAM360, Руководство по установке

Страница: 24 / 452

EN
Installing the video system CAM360
24
To perform the installation, proceed as follows:
Use the supplied self-tapping screws
A
➤
Drill a hole of Ø 6 mm for the cable entry (fig.
d
, page 8).
➤
Guide the camera cable into the vehicle interior (fig.
e
, page 8).
➤
Mark the holes for the mounting screws (fig.
f
1, page 8).
➤
Remove the camera (fig.
f
2, page 8).
➤
Drill two holes of Ø 2.4 mm for the camera bracket (fig.
g
, page 8).
➤
Guide the camera cable into the vehicle interior (fig.
h
1, page 8).
➤
Screw on the camera with the included self-tapping screws (fig.
h
2, page 8).
If you would like to attach the camera with threaded screws fitted through
the construction:
A
➤
Drill a hole of Ø 6 mm for the cable entry (fig.
d
, page 8).
➤
Guide the camera cable into the vehicle interior (fig.
e
, page 8).
➤
Mark the holes for the mounting screws (fig.
f
1, page 8).
➤
Remove the camera (fig.
f
2, page 8).
➤
Drill two holes of Ø 3.5 mm for the camera bracket.
➤
Guide the camera cable into the vehicle interior.
➤
Screw on the camera with M3 x 20 mm threaded screws.
Depending on the thickness of the construction, you may require longer
threaded screws.
NOTICE!
Self-tapping screws may only be fastened to steel metal with a minimum
thickness of 1.5 mm.
NOTICE!
Ensure that nuts cannot be pulled through the body shell when they are
tightened. Use larger washers or metal plates if necessary.
CAM360-I-DE.book Seite 24 Freitag, 9. Juni 2017 6:50 18